SEAL STRIP
Seal & Finish Remover

Removes gym finish, concrete seal, terrazzo seal, paint, varnish, enamel and lacquer.

Use on wood, concrete, terrazzo, magnesite, slate, marble, quarry tile, ceramic, cork, brick, stone, parquet, wood block, and all metals. DO NOT use on resilient tile floor such as asphalt, vinyl, rubber, linoleum. DO NOT use on 'poured floors' made with solvent-resin matrix.

Seal Strip is ready for use as received; no mixing is needed; do not add thinner.

Floors

Apply to large areas with a wool applier; use a paint brush for small areas. Apply to an area about 4 x 6 feet. Let stand until coating wrinkles; normally less than 15 minutes. Sprinkle on a thin layer of saw dust or an oil absorbent and machine-scrub with a wire brush.

Furniture & Other Small Areas

Apply with a paint brush. Let stand until coating wrinkles; normally less than 15 minutes. Remove by scraping or by washing with water.

Properties & Use Precautions

Amber colored. Non-Flammable. May be washed off with water. Thick, paint-on type; thick enough to cling to vertical surfaces. Poison. Vapor harmful. Do not take internally. Use with adequate ventilation. Contains methylene chloride and methanol. Warning and antidote are on label. Keep out of reach of children.