PRINTERS' WB INK CLEANER
For Cleaning Water-Based Printing Inks

PURPOSE

This is a good general purpose cleaner especially formulated for water-based printing inks. It will not cause swelling of synthetic rubber plates, and is safe for ceramic or rubber rollers. It may be used to clean anilox rollers, printing plates, ink sumps and hoses. It is recommended for flexo printer-slotters or conventional printer-slotters using water-based inks. Printers' WB Ink Cleaner is an excellent all purpose product for the entire pressroom and general plant cleaning, including use in automatic floor scrubbers.

APPLICATION

Printers' WB Ink Cleaner may be used to spray, soak, wipe, mop, or scrub water-based inks and other industrial soils.

DILUTION

Printers' WB Ink Cleaner is normally diluted with 5 to 20 parts warm water. For hard, dry inks, use full strength or dilute with 1 to 5 parts warm water. For automatic floor scrubbers, concentrations will vary from 1 to 30-50 parts warm water, depending on the severity of conditions.