CARDISOLV #CHM
Air-Dry Solvent Degreaser - Fast Dry - NonCombustible
Degreaser for all metals, electric motors and other surfaces. Use full strength; do not dilute. Use at ambient temperature; do not heat.
Immerse small parts, apply to large parts by spray, recirculating pump, brush-on or wipe-on. Let soak and brush if needed. Let air dry or use air hose to blow off dissolved oils and solvent,
Will not harm the insulation or "varnish" of motors. Motors may be run while immersed in Cardisolv #CHM but if run too long some bearing lubricants may be removed.
Also an excellent solvent for many resins, gums, inks and adhesives. Harmless to all metals, paints, glass, porcelain, terrazzo, concrete and wood. Trial is recommended before use on plastics, rubber and textiles.
Properties & Hazard Classes
Physical form.............
liquid
Appearance & color...........
lear, colorless
Odor...................
strong solvent
Viscosity...............
low, about 0.8 cp
Specific Gravity............
1.46
Evaporation Rate (n-butyl acetate = 100)....
446
Threshold Limit Value.........
50 ppm
Flash Point, Tag Open Cup, ASTM D-1310.
none
Boiling Point..............
189F/87C
Solubility in water...........
negligible
Solubility in common petroleum solvents...
miscible
Dielectric strength, about........
36700 volts
Precautions
For Industrial Use Only --- Keep Out Of Reach Of Children
Harmful or fatal if swallowed. Contains chlorinated hydrocarbon. Keep container closed. Use with adequate ventilation. Avoid prolonged inhalation of vapor. Avoid contact with skin and especially eyes; in case of contact flush with water, eyes for at least 15 minutes and get medical attention.