A liquid detergent-solvent blend for use in any type of pressure-discharge or spray equipment where foam is acceptable. Use hot or cold. Use at any concentration on painted surfaces and bare metals including aluminum and other soft metals and alloys. Use on glass, plastics, rubber, ceramics, masonry, textiles, coated fabrics and similar. An excellent janitorial cleaner for all surfaces. Harmless to normal skin.
Typical Uses
Cars
Walls
Trash Carts
Parts in Process
Windows
Trucks
Floors
Air Ducts
Heat Exchangers
Skylites
Busses
Ceilings
Filters
Grocery Carts
Stairs
Planes
Ramps
Radiators
Refrigerators
Cages
Boats
Washrooms
Machinery
Display Cases
Barns
Tractors
Kitchens
Sumps
Storage Bins
Tarps
Performance Properties
Cardiblitz dissolves instantly in hot or cold water; its flow rate assures consistent, accurate dilutions when fed through a metering pump or suction device such as a venturi injector.
At recommended use dilutions it provides:
.Quick wetting, penetration, dispersion, suspension and emulsification of dirt.
.Solvent-booster action to remove the thin, adherent surface film which resists removal by detergents and pressure alone.
.Foam sufficient to show the area sprayed.
.Quick, virtually spot-free rinsing due to low surface tension and deactivation of calcium and other hard-water ions.
Recommended Use Dilutions
Dilute in water to suit the job. The dilution required depends on the quantity and type of dirt, porosity of the surface, soak time allowed, pressure and temperature. Recommended per gallon of solution..
To remove light dirt from non-porous surfaces such as windows or ceramic tile walls
1 oz/gal = 1:127 water.
For most jobs on hard, non-porous surfaces
2 oz/gal = 1:63 water.
For oily conditions such as the dirt on machinery, exhaust fans, filters and ducts, and for porous surfaces such as tarps or concrete